[Snowrunner] – Kraz CHR v 1.0

Date May 8, 2020 16:35

In 1982, as part of the development of the promising Otkrytie family of military vehicles with a classic layout, the Kremenchug Automobile Plant built experimental models of two special 16-ton hoodless chassis – single and articulated, unified with KrAZ-260 vehicles and capable of carrying heavy army superstructures and artillery system. They had the designation of the Chechen Republic, which was unusual for the plant, which meant “one-time drawing”, and represented a parallel alternative family designed to test fundamentally new layout schemes and assemblies, to compare performance and new design solutions. However, in terms of their parameters and capabilities, these cars were already closer to road trains than to single trucks.

CHR-3130 (1982 – 1985) – a cabless truck with two front steered axles, a continuous frame and a special massive non-folding cab of a high location. It was based on the KrAZ-260 truck cab without an engine compartment and plumage, in the front of which a cooling radiator was rearranged. An experimental multi-fuel engine YaMZ-8421 V8 (17.24 l, 360 hp) was installed behind it with a turbo-supercharging and intermediate air cooling, partially entering the cabin and adapted to work on diesel fuel, gasoline, kerosene or their mixtures with rocket fuel . A new 10-speed gearbox YaMZ-202, the main units from KrAZ-260 and a 6.5-meter onboard platform with an awning were mounted by car. The original details were a new elongated spar frame of channels with amplifiers and a second steered and drive-through bridge.

In the process of factory and military tests, the car mounted standard wide-profile tires 1300×530 – 533 from cargo “craz” or arched Y-186 with a diameter of 1300 mm and a width of 750 mm, which ensured patency at the level of tracked vehicles. It is quite natural that such an unusual, massive, heavy and expensive construction, requiring huge expenses for the organization of special production and maintenance, scared the military away.

At the end of 1982, KrAZ-CHR-3130 cars were submitted for consideration by the military. In the future, the KrAZ-6316 car “grew” out of the design of KrAZ-CHR-3130.

Credits:
yansors

DOWNLOAD [59 MB]

[Snowrunner] – Realistic Transmissions v 1.0.3

Date May 8, 2020 15:37

This Mod changes all Semi Transmissions to 10-speeds with reworked gear ratios. This also changes all Scout Transmissions to 6-speeds with reworked gear ratios. Each Transmission retains their original purpose and functionality, but now they follow suit of IRL transmissions regarding number of Gears and the Ratios between the gears

To install:
– Download the ZIP file
– Open “Realistic Transmissions” by double clicking it, it should open in WinRAR
– Open Initial.pak the same way, it should open in WinRAR (X:Epic GamesSnowRunneren_uspreloadpaksclient)
– Navigate to X:initial.pak[media]classes within Initial.pak while in WinRAR
– Copy the contents from “Realistic Transmissions” (a folder named “Gearboxes”) and paste that within “Classes” folder in Initial.pak while using WinRAR
– WinRAR will open a new window and ask if you want to overwrite the archive, simply hit OK
– Close all WinRAR windows and start the game and enjoy the mod

To uninstall:
– To revert to old transmissions, open the backup copy of Initial.pak you made earlier, and repeat the steps above, but using the original files from Initial.pak

Version 1.0.3:
* Fixed a missing from the scout.xml file

Credits:
eclipse538

DOWNLOAD [4 KB]

[Snowrunner] – Azov 64131 Buffed Truck v 1.1

Date May 8, 2020 15:16

The ability to install three types of suspension, of different heights and characteristics is added, the corresponding wheel sizes are added, the maximum speed limit is increased ~ 20%, the increased power of all engines is ~ 10%, the fuel tank is 550 l, a heavy winch is installed, and the vehicle weight is reduced ~ 10%. You can use the middle suspension and middle wheels when towing ordinary trailers, and the high suspension and big wheels when towing heavy or special trailers, or use the low suspension and double tires to increase stability. Mod is designed for manual installation. Installation replace the appropriate files in your archive initial.pak

Version 1.1:
* A Truck is available for purchase in America
* An improved 6 speed gearshift has been added, with a low first gear for less use of a lower gear, and a better effect of short pulling away, if you do not need it do not make changes from the gearboxes folder, replaces other mods that change this box
* Another set of wheels for installation
* Front axle height reduced
* The stock bar of light above the cabin has been removed (it will remain with already purchased Truck)

Original files added if you need them

Credits:
Condor_Nos

DOWNLOAD [15 KB]

[Snowrunner] – Azov 5319 v 1.0

Date May 7, 2020 20:24

Changes:
* Added Arched Tires from Tayga
* Fuel Tank Capacity changed from 200 to 300 liters
* Default Fenders removed
* Shift of Addons due Mini Loader disabled
* Added Some Colors Schemes
* All others are default

Credits:
derstrishe

DOWNLOAD [8 KB]

[Snowrunner] – RocketFX – Realistic Graphics Mod (Reshade) v 1.0

Date May 7, 2020 20:19

– Better Sunny Weathers & Balanced Saturation
– Better Rainy Weather
– Better Clouds & FOG
– Better Mists
– Better Water
– Better Lighting
– Better GodRays
– Better HBAO&SSAO
– Better Sky Colours & Brightness Visual Effects
– Better Puddles
– Better Vehicle Head & Rear Lights
– Better Distant Lights
– Better Sunrise and Sunset Hours + High Quality ENB and ReShade Preset
– Better Color Process
– Better Vehicle Reflections
– Better & Static Bokeh Effect
– Better Ambient Occlusion
– Better Shadows
– Better Moon & Stars
– FXAA&SMAA with Low Performance Cost
– Natural Color Theme
– ReShade based DOF

To install:
– Extract the ZIP in “\SnowRunner\en_us\Sources\Bin”
– Press F9 to activate Mod

Credits:
JonnyRocketGames

DOWNLOAD [35 MB]

[Snowrunner] – Western Star 6900 TwinSteer AWD v 1.0

Date May 7, 2020 20:12

To install:
– Open init.pak with WinRar, in WinRar, browse to MediaClassesTrucks —-> (Default location: C:Program FilesEpic GamesSnowRunneren_uspreloadpaksclient)
– Open a new explorer window and brows to the downloaded file and drag it into winrar. A popup will ask you to do something
– Choose under compression method: “Store” and press “OK”
– Close Winrar and start the game

Credits:
JeroenV1982

DOWNLOAD [6 KB]

[Snowrunner] – Realistic Mud and Projection on Vehicles v 1.0

Date May 7, 2020 20:08

To install:
– Search the initial.pak file located in the client folder ” SnowRunner en_us preload paks client”
– Open initial.pak with winrar and go to the classes folder “[media] classes”
– Replace the particles folder with that of the mod

Credits:
MudSeries

DOWNLOAD [48 KB]

You may be interested

  • Sponsored links
  • Actions